Agifly 400 g 
- Highly effective:
Broad-ranging activity against insects
Works as a bait
Long-lasting protection against parasites
Kills insects quickly thanks to its two-component composition
Does not get washed off by water
Resistant to sunlight
Starts working as soon as an insect comes in contact with the surface treated
Safe:
Resistant to being licked off by animals
A low-hazard substance
Licensed for facilities subject to veterinary supervision
Easy to administer:
Multiple bottle size options
Multiple application methods
Retains its properties in water of any hardness
For extermination of flies, cockroaches, fleas and other arthropods in livestock and other facilities subject to veterinary supervision
Imidacloprid 15%, cyfluthrin 0,1%, tricosene, excipients
To prepare working emulsion, dilute the powder with appropriate amount of water of room temperature.
The working solution can be applied in different ways.
Table 1. Treating surfaces using a brush.
Working solutions should be prepared in a separate container by mixing the powder with water.
|
Powder, g |
Water, L |
Brush application method and size, cm |
Surface area to be treated, m2 |
|
400 |
0,32 |
at least 30 10×30 cm lines |
160 |
|
100 |
0,08 |
at least 8 10×30 cm lines |
40 |
|
25 |
0,02 |
at least 2 10×30 cm lines |
10 |
The duration of insecticidal effect using this method of applicationis 6 to 8 weeks. • Mix 400 g of powder with 0.32 l of water and stir until they blend together into a homogeneous mixture. Apply the solution prepared to the surface to be treated with a brush making lines (at least 30 10×30 lines). The resulting solution quantity will be enough to treat a room with the floor ar ea of 160 m2.
• Mix 100 g of powder with 0.08 l of water. Apply the solution prepared to the surface to be treated with a brush making lines (at least 8 10×30 lines). The resulting solution quantity will be enough to treat a room with the floor area of 40 m2.
• Mix 25g of powder with 0.02 l of water. Apply the solutionprepared to the surface to be treated with a brush making lines (at least 2 10×30 lines). The resulting solution quantity will be enough to treat a room with the floor area of 10 m2.
Table 2. Surface treatment by spraying.
The working solution should be prepared in the spraying device tank.
|
Powder, g |
Water, L |
Application method |
Surface area to be treated, m2 |
|
400 |
3,2 |
Spraying at least 30% of wall and ceiling area |
160 |
|
100 |
0,8 |
40 |
|
|
25 |
0,2 |
10 |
The duration of insecticidal effect using this method of application is 4 to 6 weeks.
• Mix 400 g of powder with 0.32 l of water. The resulting solution quantity will be enough to treat a room with the floor area of 160 m2.
• Dissolve 100 g of powder in 0.8 l of water stirring it thoroughly. The resulting solution quantity will be enough to treat a room with the floor area of 40 m2.
• Dissolve 25g of powder in 0.2 l of water stirring it thoroughly. The resulting solution quantity will be enough to treat a room with the floor area of 10 m2.
The product should not be applied to dirty, highly porous or freshly whitewashed surfaces. No animals should be inside during the treatment, the remaining feed, water and milking appliances should be removed, milking equipment should be covered with polyethylene wrap, eggs should be collected from poultry houses. Animals may be let into the premises once the surfaces treated have dried completely. The product does not irritate the skin or ocular mucous membranes, nor does it have any sensitizing activity. The product is toxic to fish and bees.
The product should be stored sealed in manufacturer packaging away from heating appliances and open flame, protected from
direct sunlight and kept separate from food products and feeds at temperatures between - 20°С and + 45°С. The solution prepared should be used within one working day. If the treatment process was interrupted for more than 30 minutes, the solution should be re-stirred before use.
The insecticide has a shelf life of 5 years from the date of manufacture, provided that it is stored sealed in the manufacturer
packaging in compliance with storage conditions. Storage time of working solutions is 24 hours.
Срок годности инсектицидного средства при соблюдении условий хранения в закрытой упаковке производителя – 5 лет со дня производства.
Срок годности рабочих растворов в течение суток.
Quality and product control -
guarantee for our customers
customers and their pets
