Agifly 25g
Maximum efficacy – high active ingredient content.
Long-lasting protection – the effect after application lasts from 6 to 8 weeks, depending on the method of application.
Versatility – the product can be used to control not only flies but also other insects such as wasps, cockroaches, bed bugs and fleas.
Easy to use - the powder is highly soluble in water. The ready-to-use solution can be applied by spraying or by swabbing, or it can be applied dry and not dissolved in water and spread in areas where the vermin are present.
Harmless – the product is a low-hazard substance and is not harmful to human health.
Agifly For the elimination of flies, cockroaches, fleas and other arthropods in livestock buildings and other veterinary facilities
Imidacloprid 15%, pyrethroid, tricosene, additives
In order to prepare a working solution, dilute the product in an appropriate amount of water at room temperature. The working solution can be used in different ways.
Table 1. Surface processing by applying brush strokes
The working solution is prepared in a separate container and mixed with water.
Powder volume, g | Water volume, l | Brush application and size, cm | Surface area treated, m2 |
400 | 0.32 | minimum 30 10x30 cm strips | 160 |
100 | 0.08 | minimum 8 10x30 cm strips | 40 |
25 | 0.02 | minimum 2 10x30 cm strips | 10 |
The insecticidal effect lasts for 6 to 8 weeks with this method of application.
- Take 400 g of the product per 0.32 l of water and stir until a homogeneous mixture is obtained. Apply the prepared solution to the surfaces with a brush, using strokes (at least 30 strips of 10×30 cm). The amount of solution is calculated to process a room with a 160 m2 floor area.
- Mix 100 g of the product with water at the rate of 100 g of the product per 0.08 litres of water. Apply the prepared solution to the surfaces with a brush, using strokes (at least 8 strips of 10×30 cm). The amount of solution is calculated for the processing of a room with a 40 m2 floor area.
- Mix 25 g of the product with water at the rate of 25 g of the product per 0.02 l of water. Apply the prepared solution to the surfaces with a brush, using strokes (at least 2 strips of 10×30 cm). The amount of solution is calculated for the treatment of a room with a 10 m2 floor area.
Table 2. Surface processing by spraying
The working solution of the agent is prepared in the spraying device's tank.
Powder volume, g | Water volume, l | Application method | Surface area treated, m2 |
400 | 0.32 | Spraying at least 30% of the wall and ceiling area | 160 |
100 | 0.08 | 40 | |
25 | 0.02 |
10 |
The insecticidal effect lasts 4 to 6 weeks with this processing method.
- 400 g of the product in 3.2 litres of water. The amount of solution is calculated to process a room with a 160 m2 floor area.
- Dissolve 100 g of the product in 0.8 litres of water while stirring thoroughly. The amount of solution is calculated for the processing of a room with a 40 m2 floor area.
- Dissolve 25 g of the product in 0.2 l of water while stirring thoroughly. The amount of solution is calculated for the treatment of a room with a 10 m2 floor area.
The product should not be applied to dirty, heavily porous or freshly whitewashed surfaces. During processing, the animals are removed from the premises, the remains of feed, water and milking equipment are removed, milking equipment is covered with plastic wrap and eggs are collected in the poultry houses. Animals may be brought indoors after the processed surfaces have dried completely. The product is not irritating to the skin and conjunctiva and has no sensitising effect. The product is toxic to fish and bees.
Store the product in a closed container of the manufacturer, away from heating appliances and open flame, in a place protected from direct sunlight, away from food and feed at temperatures between minus 20 °С and plus 45 °С. The prepared solution should be used within one working day. If the processing is interrupted for more than 30 minutes, the solution must be stirred up again before use.
The shelf life of the insecticidal product when stored in the sealed original package is 5 years from the date of manufacture. The shelf life of working solutions is within days.
Качество и контроль продукции —
гарантия для наших клиентов
покупатели и их питомцы